ansys求解中遇到the 3 nodes of element 28 are co-linear

ansys求解中遇到the 3 nodes of element 28 are co-linear ansys中“there is no node definition”怎么办 ansys中怎么用node点创造一个面单元 ANSYS中8 node 77的意思在ANSYS中进行单元类型的选择时,经常是诸如“8node 77”格式,如图所示. ansys计算时出现 The value of UZ at node 11 is 4.907789514e19. 关于ANSYS的悬臂梁问题在ANSYS界面中,我显示创造两个Node,然后创造Element通过Tru Nodes创建了一条直线,然后就是一段固定,另一端受力,最后求解（设定类型、参数之类略去叙述）,结果梁几乎不发 ansys模态分析.最后求解时出现下面的警告：Element 1 has an undefined node number 0以及：Element 2 has an undefined node number 0,然后软件自动关闭 求救：ANSYS在合并节点后出现提示如下 您的答案解决了我这个问题的话,After NUMMRG,ALL,node 3 (and possibly others) is associated with more than one solid model entity.Future commands which depend on the node to solid model co ansys 桁架结构 创建点用ansys 选择link.但是用node创建点,然后连接,不用分网,用keypoint 创建点,分网,就不能求解.为什么》? 桁架中,ansys怎样求解每根杆的内应力 ansys workbench中solve求解时出问题了怎么回事,上图 PDMS中P-Node是什么意思 ansys 中加载重力加速度时,加了约束还出现如下问题,其原因有哪些及解决方案.The value of UZ at node 2158 is 236632696.It is greater than the current limit of 1000000.This generally indicates rigid body motion as a result of C#中TreeNode node = new TreeNode(); node.ChildNodes是什么意思? 在PROTEL99SE中LOAD NETS时遇到下列错误Macro 4:New ComponentAdd new component S3Error:Footprint * not found in libraryMacro 5:New NodeAdd node DS3-5 to net NetDS4_9Error:Node not foundMacro 46:New NodeAdd node DS3-7 to net GNDError:Node not fo 我在ansys网格划分中遇到这样的提示,element type 1 is shell63,which cannot be used with the VMES command.meshing of volume 1 aborted. ABAQUS中出现如下错误,一般是由于什么原因造成的!Node set assembly__pickedset26 has not been definedUnable to locate node set assembly__pickedset26. The node set must have been previously defined. ansys 中