Ansys的错误信息The degree of freedom solution is not available是什么意思?我是直接建立了有限元模型的!

Ansys的错误信息The degree of freedom solution is not available是什么意思?我是直接建立了有限元模型的! Ansys计算钢桁架时出现错误信息The degree of freedom solution is not available,The PRNSOL command isAnsys计算钢桁架时出现错误信息The degree of freedom solution is not available,The PRNSOL command is ignored.该怎么解决? abaqus的错误信息,怎么改正呀,Degree of freedom 11 and at least one of degrees of freedom 1 thru 6 must be active in the model for *coupled temp-disp.Check the procedure and element types used in this model. “错误信息：我用的是搜狗浏览器. the degree of belongingness the degree of vertical temperature the degree of hear 莪想肯定的答案 ansys用solid45建简支梁实体模型约束如何施加?我想模拟实际情况,模拟400*650（mm）的板式橡胶支座.我在相应位置用了DA命令,可是输出结果时显示“The degree of fredom solution is not available ,是说结构 为什么上谷歌,搜索 带有敏感字/词的内容,会显示如下错误信息?▲ Access violation at keyword in the Google search.Read of IP address. degree degree degree 以the higher degree,the better为题展开辩论.需正反两方的一些论据.the higher degree ,the better.学历越高,成越大. 利用ls-dyna对生成的K文件进行求解的过程中,出现了如下的错误信息,错误信息如下：Error 9021Memory is not set 32324904 words shortmemory size 20000000Increase the memnry size by one of the followingwhere#### is the number o Ansys分析中solution里面DOF Solution分析出来单位是什么啊?LOAD STEP= 0 SUBSTEP= 1 TIME= 1.0000 LOAD CASE= 0 THE FOLLOWING DEGREE 谁能告诉我在ANSYS里面分析出现这种情况是什么意思a small negative equation solver pivot term has been encountered at the UY degree of node 69649. Check for an insufficiently constrained model. ANSYS Workbench和经典ANSYS的区别 ANSYS 有限元建模问题,划分网格（用了命令lesize和amap）时出现了如图错误信息,请问应该如何入手改正?