Cisco认证实验考试经典题库CCIE_BootCamp3.0(第十章)[1]
来源:学生作业帮助网 编辑:作业帮 时间:2024/11/27 07:12:07 Cisco认证
Cisco认证实验考试经典题库CCIE_BootCamp3.0(第十章)[1]Cisco认证
【网络综合 - Cisco认证试题】
137.20.0.0/24 is subnetted, 1 subnets c 137.20.20.0 is directly connected, ethernet 0 172.168.0.0/16 is variably subnetted, 7 subnets, 2 masks o ia 172.168.30.0/24 [110/65] via 172.168.100.3, 00:09:03, serial 1.1 i 172.168.40.0/24 [100/8576] via 172.168.200.2, 00:01:11, serial 1.2 o ia 172.168.60.0/24 [110/1572] via 172.168.65.1. 00:09:03, bri0 c 172.168.65.0/24 is directly connected, bri0 c 172.168.100.0/24 is directly connected, serial 1.1 o 172.168.100.0/24 [110/64] via 172.168.100.3, 00:09:13, serial 1.1 c 172.168.200.0/24 is directly connected, serial 1.2 o e1 192.168. 21.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o e1 192.168. 17.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o e1 192.168. 70.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o*e1 0.0.0.0/0 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 r5#show ip ospf int bri0 bri0 is up, line protocol is up (spoofing) internet address 172.168.65.2/24, area 10 process id 1, router id 172.168.200.1, network type point_to_point, cost 1562run as demand circuit donotage lsa allowed. transmit delay is 1 sec, state point_to_point, timer intervals configured, hello 10, dead 40, wait 40, retransmit 5 hello due in 00:00:06 neighbor count is 1, adjacent neighbor count is 1 adjacent with neighbor 172.168.100.6 (hello suppressed) suppress hello for 1 neighbor(s) r5#show dialer bri0 – dialer type =isdn dial string successes failures last called last status 4930622 1 0 00:08:45 successful 0 incoming call(s) have been screened 0 incoming call(s) rejected for callback bri0:1 – dialer type =isdn idle time(45 secs), fast idle timer (20 secs) wait for carrier (30 secs), re-enable (15 secs) dialer state is idle bri0:2 – dialer type =isdn idle time(45 secs), fast idle timer (20 secs) wait for carrier (30 secs), re-enable (15 secs) dialer state is idle r5# now go bCisco认证
137.20.0.0/24 is subnetted, 1 subnets c 137.20.20.0 is directly connected, ethernet 0 172.168.0.0/16 is variably subnetted, 7 subnets, 2 masks o ia 172.168.30.0/24 [110/65] via 172.168.100.3, 00:09:03, serial 1.1 i 172.168.40.0/24 [100/8576] via 172.168.200.2, 00:01:11, serial 1.2 o ia 172.168.60.0/24 [110/1572] via 172.168.65.1. 00:09:03, bri0 c 172.168.65.0/24 is directly connected, bri0 c 172.168.100.0/24 is directly connected, serial 1.1 o 172.168.100.0/24 [110/64] via 172.168.100.3, 00:09:13, serial 1.1 c 172.168.200.0/24 is directly connected, serial 1.2 o e1 192.168. 21.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o e1 192.168. 17.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o e1 192.168. 70.0/24 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 o*e1 0.0.0.0/0 [110/21] via 137.20.20.1. 00:09:03, ethernet 0 r5#show ip ospf int bri0 bri0 is up, line protocol is up (spoofing) internet address 172.168.65.2/24, area 10 process id 1, router id 172.168.200.1, network type point_to_point, cost 1562run as demand circuit donotage lsa allowed. transmit delay is 1 sec, state point_to_point, timer intervals configured, hello 10, dead 40, wait 40, retransmit 5 hello due in 00:00:06 neighbor count is 1, adjacent neighbor count is 1 adjacent with neighbor 172.168.100.6 (hello suppressed) suppress hello for 1 neighbor(s) r5#show dialer bri0 – dialer type =isdn dial string successes failures last called last status 4930622 1 0 00:08:45 successful 0 incoming call(s) have been screened 0 incoming call(s) rejected for callback bri0:1 – dialer type =isdn idle time(45 secs), fast idle timer (20 secs) wait for carrier (30 secs), re-enable (15 secs) dialer state is idle bri0:2 – dialer type =isdn idle time(45 secs), fast idle timer (20 secs) wait for carrier (30 secs), re-enable (15 secs) dialer state is idle r5# now go bCisco认证