作业帮英语翻译your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle To lock:Close the shackle and scramble the shackle and scramble the dials.To reset to a new combination:1.open the lock 2.Turn the
来源：学生作业帮助网 编辑：作业帮 时间：2024/11/29 18:13:01
英语翻译your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle To lock:Close the shackle and scramble the shackle and scramble the dials.To reset to a new combination:1.open the lock 2.Turn the
英语翻译
your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle
To lock:Close the shackle and scramble the shackle and scramble the dials.
To reset to a new combination:1.open the lock 2.Turn the shackle 180 3.Depress the shackle and your lock is now ready to use of your new combination
The indicator can be activated by opening the lock with on overriding key .when the lock is opened by an ovrriding key ,the indicator in the form of a red "tongue"will pop out
onto the groove sruface on the front side of the lock casing.
To reset the indicator:1.insert the reset key into hole located of the top suface of the lock body befween the shackle legs as shown in Fig.1
2.Turn the key anti-clockwise until the indicator moves back to the lock body as shown in Fig.2.
Note:the overriding key must be withdrawn before resetting the indicator.
英语翻译your lock is preset to open at 0-0-0 To open:Turn the dials to 0-0-0 on the windows and pull up the shackle To lock:Close the shackle and scramble the shackle and scramble the dials.To reset to a new combination:1.open the lock 2.Turn the
您的锁是预设开启在0-0-0开放：把转盘,以0-0-0在Windows和拉动了束缚
锁定：关闭的束缚和混排的束缚和混排的转盘.
重置到一个新的组合： 1.open锁定2.turn该束缚180 3.depress的束缚和您的锁是现在已经准备好使用您的新组合
指标可以启动开放锁就压倒一切的关键,当锁打开一ovrriding的关键,在指标的形式,一个红色的“舌头” ,将弹出
上槽sruface在前面一边的锁套管 重置指标： 1.insert重置关键到孔位于的顶端表面的锁体befween该束缚腿显示,在图1
2.turn的关键反顺时针方向行驶,直到指标搬回锁定机构,显示在图2 .
注：压倒一切的关键,必须予以撤销,然后将其重置指标