作业帮,我有2个VHDL源程序调试不出来.library ieee;use ieee.std_logic_1164.all;use ieee.std_logic_arith.all;use ieee.std_logic_unsigned.all;entity smultadd1 is port (clk_regbt,clk_reg:in std_logic;a0,a1,a2,b0,b1,x0,x1,x2:in std_logic_vector(4 downt
来源：学生作业帮助网 编辑：作业帮 时间：2024/12/01 08:06:27
,我有2个VHDL源程序调试不出来.library ieee;use ieee.std_logic_1164.all;use ieee.std_logic_arith.all;use ieee.std_logic_unsigned.all;entity smultadd1 is port (clk_regbt,clk_reg:in std_logic;a0,a1,a2,b0,b1,x0,x1,x2:in std_logic_vector(4 downt
,我有2个VHDL源程序调试不出来.
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity smultadd1 is
port (clk_regbt,clk_reg:in std_logic;
a0,a1,a2,b0,b1,x0,x1,x2:in std_logic_vector(4 downto 0);
y0,y1:in std_logic_vector(8 downto 0);
yout:out std_logic_vector(8 downto 0));
end smultadd1;
architecture bhv of smultadd1 is
signal tan,tbn,tp2n:std_logic;
signal cnt:std_logic_vector(2 downto 0);
signal ta,tb,taa,tbb:std_logic_vector(3 downto 0);
signal tmpa,tmpb:std_logic_vector(4 downto 0);
signal tp,tpp,tppp:std_logic_vector(7 downto 0);
signal ytmp,p:std_logic_vector(8 downto 0);
begin
tmpa'0');
tmpb'0');
ta
,我有2个VHDL源程序调试不出来.library ieee;use ieee.std_logic_1164.all;use ieee.std_logic_arith.all;use ieee.std_logic_unsigned.all;entity smultadd1 is port (clk_regbt,clk_reg:in std_logic;a0,a1,a2,b0,b1,x0,x1,x2:in std_logic_vector(4 downt
tmpb'0');
这里有问题吧
tmpb:std_logic_vector(4 downto 0);
y0,y1:in std_logic_vector(8 downto 0);
tmpb和y0、y1信号的位数不一样