作业帮用51单片机和C语言编程.利用矩阵键盘依次显示1,2,3,4,5.……12的平方,显示在数码管上.#include <reg51.h>#define uchar unsigned char#define uint unsigned intuint temp,num,num1;uchar code table[]={0xfc,0x60,0xda,0xf2,0x66
来源：学生作业帮助网 编辑：作业帮 时间：2024/11/29 15:50:29
![用51单片机和C语言编程.利用矩阵键盘依次显示1,2,3,4,5.……12的平方,显示在数码管上.#include <reg51.h>#define uchar unsigned char#define uint unsigned intuint temp,num,num1;uchar code table[]={0xfc,0x60,0xda,0xf2,0x66](/uploads/image/z/5185266-42-6.jpg?t=%E7%94%A851%E5%8D%95%E7%89%87%E6%9C%BA%E5%92%8CC%E8%AF%AD%E8%A8%80%E7%BC%96%E7%A8%8B.%E5%88%A9%E7%94%A8%E7%9F%A9%E9%98%B5%E9%94%AE%E7%9B%98%E4%BE%9D%E6%AC%A1%E6%98%BE%E7%A4%BA1%2C2%2C3%2C4%2C5.%E2%80%A6%E2%80%A612%E7%9A%84%E5%B9%B3%E6%96%B9%2C%E6%98%BE%E7%A4%BA%E5%9C%A8%E6%95%B0%E7%A0%81%E7%AE%A1%E4%B8%8A.%23include+%26lt%3Breg51.h%26gt%3B%23define+uchar+unsigned+char%23define+uint+unsigned+intuint+temp%2Cnum%2Cnum1%3Buchar+code+table%5B%5D%3D%7B0xfc%2C0x60%2C0xda%2C0xf2%2C0x66)
用51单片机和C语言编程.利用矩阵键盘依次显示1,2,3,4,5.……12的平方,显示在数码管上.#include <reg51.h>#define uchar unsigned char#define uint unsigned intuint temp,num,num1;uchar code table[]={0xfc,0x60,0xda,0xf2,0x66
用51单片机和C语言编程.利用矩阵键盘依次显示1,2,3,4,5.……12的平方,显示在数码管上.
#include <reg51.h>
#define uchar unsigned char
#define uint unsigned int
uint temp,num,num1;
uchar code table[]={0xfc,0x60,0xda,0xf2,0x66,0xb6,0xbe,0xe0,0xfe,0xe6,0xee,0x3e,0x9c,0x7a,0x9e,0x8e}; //0~f
void delay(uint z) //延迟
{
uint x,y;
for(x=0;x<110;x++)
for(y=0;y<z;y++);
}
void display(uchar bai,uchar shi,uchar ge)
{
P2=0x7f;
P0=table[bai];
delay(1);
P2=0xbf;
P0=table[shi];
delay(1);
P2=0xdf;
P0=table[ge];
delay(1);
}
uint keyscan()
{
P1=0xfd;
temp=P1;
temp=temp&0xf0;
while(temp!=0xf0)
{
delay(5);
temp=P1;
temp=temp&0xf0;
while(temp!=0xf0)
{
temp=P1;
switch(temp)
{
case 0xed:num=1;
break;
case 0xdd:num=4;
break;
case 0xbd:num=9;
break;
case 0x7d:num=16;
break;
}
while(temp!=0xf0)
{
temp=P1;
temp=temp&0xf0;
}
}
}
P1=0xfb;
temp=temp&0xf0;
while(temp!=0xf0)
{
delay(5);
P1=0xfb;
temp=temp&0xf0;
while(temp!=0xf0)
{
temp=P1;
switch(temp)
{
case 0xeb:num=25;
break;
case 0xdb:num=36;
break;
case 0xbb:num=49;
break;
case 0x7b:num=64;
break;
}
while(temp!=0xf0)
{
temp=P1;
temp=temp&0xf0;
}
}
}
P1=0xf7;
temp=temp&0xf0;
while(temp!=0xf0)
{
delay(5);
P1=0xf7;
temp=temp&0xf0;
while(temp!=0xf0)
{
temp=P1;
switch(temp)
{
case 0xe7:num=81;
break;
case 0xd7:num=100;
break;
case 0xb7:num=121;
break;
case 0x77:num=144;
break;
}
while(temp!=0xf0)
{
temp=P1;
temp=temp&0xf0;
}
}
}
return num;
}
void main()
{
P0=0x00;
P1=0xff;
while(1)
{
num1=keyscan();
display(num1/100,num1%100/10,num1%10);
}
}
程序启动之后,矩阵键盘只有前三个有用可以显示出相应的1,4,9.后面的按键通通没用,不知道问题出在哪
用51单片机和C语言编程.利用矩阵键盘依次显示1,2,3,4,5.……12的平方,显示在数码管上.#include <reg51.h>#define uchar unsigned char#define uint unsigned intuint temp,num,num1;uchar code table[]={0xfc,0x60,0xda,0xf2,0x66
//这是我以前写的 你对照一下吧 字体太小累眼睛 我的这个 绝对可用 没有错误 只是I/0口不
//一样 主要是你矩阵键盘那块有问题 你对照我的 很快就找出来了
#include
#define uchar unsigned char#define uint unsigned int
sbit dula=P2^6;sbit wela=P2^7;
uchar code table[]={
0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,
0x39,0x5e,0x79,0x71,0};
uint jzjp();
void shumaguan(uint shu);
void delay(uint z);
void init();
void main()
{
init();
while(1)
{
shumaguan(jzjp());
}
}
void init()
{
}
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void shumaguan(uint shu)
{
uchar bai,shi,ge;
bai=shu/100;
shi=shu%100/10;
ge=shu%10;
dula=1;
P0=table[bai];
dula=0;
P0=0xff;
wela=1;
P0=0xfe;
wela=0;
delay(5);
dula=1;
P0=table[shi];
dula=0;
P0=0xff;
wela=1;
P0=0xfd;
wela=0;
delay(5);
dula=1;
P0=table[ge];
dula=0;
P0=0xff;
wela=1;
P0=0xfb;
wela=0;
delay(5);
}
uint jzjp()
{
uint shu,num;
uchar temp;
P3=0xfe;
temp=P3;
temp=P3&0xf0;
if(temp!=0xf0)
{
delay(5);
if(temp!=0xf0)
{
temp=P3;
switch(temp)
{
case 0xee:num=1*1;
break;
case 0xde:num=2*2;
break;
case 0xbe:num=3*3;
break;
case 0x7e:num=4*4;
break;
}
while(temp!=0xf0)
{
temp=P3;
temp=temp&0xf0;
shumaguan(shu);
}
}
}
P3=0xfd;
temp=P3;
temp=P3&0xf0;
if(temp!=0xf0)
{
delay(5);
if(temp!=0xf0)
{
temp=P3;
switch(temp)
{
case 0xed:num=5*5;
break;
case 0xdd:num=6*6;
break;
case 0xbd:num=7*7;
break;
case 0x7d:num=8*8;
break;
}
while(temp!=0xf0)
{
temp=P3;
temp=temp&0xf0;
shumaguan(shu);
}
}
}
P3=0xfb;
temp=P3;
temp=P3&0xf0;
if(temp!=0xf0)
{
delay(5);
if(temp!=0xf0)
{
temp=P3;
switch(temp)
{
case 0xeb:num=9*9;
break;
case 0xdb:num=10*10;
break;
case 0xbb:num=11*11;
break;
case 0x7b:num=12*12;
break;
}
while(temp!=0xf0)
{
temp=P3;
temp=temp&0xf0;
shumaguan(shu);
}
}
}
P3=0xf7;
temp=P3;
temp=P3&0xf0;
if(temp!=0xf0)
{
delay(5);
if(temp!=0xf0)
{
temp=P3;
switch(temp)
{
case 0xe7:num=13*13;
break;
case 0xd7:num=14*14;
break;
case 0xb7:num=15*15;
break;
case 0x77:num=16*16;
break;
}
while(temp!=0xf0)
{
temp=P3;
temp=temp&0xf0;
shumaguan(shu);
}
}
}
return num;
}