英语翻译part,a sleeve part,pockets,material and color of a jacket but also original design of these parts is considered in this paper.The parameter of each part point of a jacket is expressed by x coordinate and y coordinate as shown in Table 1,w

英语翻译part,a sleeve part,pockets,material and color of a jacket but also original design of these parts is considered in this paper.The parameter of each part point of a jacket is expressed by x coordinate and y coordinate as shown in Table 1,w
英语翻译
part,a sleeve part,pockets,material and color of a jacket but also original design of these parts is considered in this paper.The parameter of each part point of a jacket is expressed by x coordinate and y coordinate as shown in Table 1,where coordinates values of each point are expressed by integer values,and a jacket is expressed by the connection of these points as shown in Fig.1.As for material,quality property and pattern are dealt with by texture in this paper.
2.2 Flow of Design
Fig.2 shows the system outline.The jacket design flow is as follows.
(1) A user starts jacket design having an image of designed jackets.The system gen- erates jacket candidates by the random combination of each part of a jacket,i.e.,a body,a collar,a sleeve,pockets,material and color of a jacket,and presents them a user as initial candidates.
(2) A user subjectively evaluates jackets presented in procedure (1) based on his/her own image of jackets.A user also chooses the most favorite jacket among pre- sented jackets.
(3) The system modifies jackets according to user’s evaluations using Genetic Algo- rithms (GA) operations.
(4) The system presents a user designed jacket candidates again.
(5) Repeating procedures (2),(3) and (4),i.e.,evaluations,modifications and presen- tations,with interaction between a user and the system,the system designs jackets that satisfy a user.When a user is satisfied some designed jacket,design proce- dures are finished and satisfying jackets are obtained reflecting user’s Kansei and subjective evaluation.

英语翻译part,a sleeve part,pockets,material and color of a jacket but also original design of these parts is considered in this paper.The parameter of each part point of a jacket is expressed by x coordinate and y coordinate as shown in Table 1,w
这应该是一份使用说明书吧,讲的大致内容是包装盒离应该有的物品,一个护套,以及一些参数,使用方法,参数用x坐标和y坐标表示,如表1所示,在坐标值的每个点都是整数表示的价值,以及所表达的外套是连接这些点所显示的图0.1 .至于材料,质量和方式的财产处理的内容都在本文件中.
图.2显示了系统概述.此产品的设计流程如下.
专业术语太多,不好整.