焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t

来源:学生作业帮助网 编辑:作业帮 时间:2024/11/25 10:40:36
焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
xRK_e&E76 rC+h'F4EGB"1*_l^ bPff=uo<Vm(K/8^JSP5mh\LdUt]Bf,#cDdMS'M0ڎ84I4Ӗ].Z'vOlG&(*vi&B!TcIӺO\[Hki#Y XbKQ(tEU3F&cxš}y00-a0c><*(NTRu!v1јHͲM-&>1FtT߹z=zBjl;#0jjp~FZ6+]pw_:\# ppBXچ>/ zМ.?}o]^?c'ZO.yoQm _r#=Q[*ÇTz1x#\rSha8QmtwX=4cX\&SL w@ݲ!gx3qy@AOp{[n-" {+Zgv"_׌1Ip(-x\vc-dtV1&V:&o~ E`^[, zP$88sP Aw[m"Z „Wb {VF< xZkach1!Rt`.(JՃ6j`26@kŠjhd?w|Wc؍+§=

焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
焊接英文翻译
The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The torch is moved in a small circle to establish a pool.Then the torch is tilted back on about a 75°angle and moved back slightly while sufficient filler metal is dipped into the pool.

焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
多伦多的手工焊接填充金属熔池techniqui在图1所示,10.First弧电极之间和工作使用高频电弧starting.Touch盯着不recommended.The成立火炬在一个小圈子动议建立一个倾斜的火炬在大约75 °角,搬回轻微上升,而充足的钎料是入池浸回pool.Then

图表1-10 中已经阐述了GTA焊丝变成熔池的方法。
首先,用高频率起弧使电极上出现电弧。注意不要用手接触,或用眼睛直视。 火焰以小圆形移动,来形成熔池。
然后,把火焰后仰75°,往回稍微移动,把足够的焊丝放入池中。
GTA没有翻出来~ 不过都是我自己翻的 应该不影响你的理解吧
希望楼主满意!...

全部展开

图表1-10 中已经阐述了GTA焊丝变成熔池的方法。
首先,用高频率起弧使电极上出现电弧。注意不要用手接触,或用眼睛直视。 火焰以小圆形移动,来形成熔池。
然后,把火焰后仰75°,往回稍微移动,把足够的焊丝放入池中。
GTA没有翻出来~ 不过都是我自己翻的 应该不影响你的理解吧
希望楼主满意!

收起